How to Use ImagiSnap
ImagiSnap combines a fitted Base Case with an interchangeable magnetic Snap-On Cover. Install the Base Case on the phone, align the Snap-On Cover with the camera opening, and bring it toward the back of the case. The magnetic system guides the cover into position. To change the design, lift the Snap-On Cover from the camera-frame edge and separate it from the Base Case.
Before You Begin
Confirm that the Base Case and Snap-On Cover are made for the same exact phone model. A Snap-On Cover is not a complete phone case by itself and should be used with the compatible Base Case.
How to Install the Base Case
Insert the phone into the Base Case one side at a time, then press around the corners until the case sits evenly. Check that the buttons, charging port, speakers and camera opening align with the phone. Do not force a Base Case made for a different model.
How to Attach a Snap-On Cover
Hold the phone with the back facing upward. Align the camera opening of the Snap-On Cover with the Base Case, then lower the cover toward the back. The magnetic ring will draw it into position. Adjust the alignment when necessary until the cover sits flat.
No special cleaning or preparation is required before normal installation. The ImagiSnap system is designed for repeated cover changes in everyday use.
How to Remove a Snap-On Cover
Hold the phone securely and lift the Snap-On Cover from the camera-frame edge. Pull it away from the Base Case until the magnetic connection releases. The Base Case can remain on the phone while the cover is changed.
How to Change Designs
Remove the current Snap-On Cover, align the next design with the camera opening, and let the magnetic system attach it to the Base Case. There is no need to remove the phone from the Base Case between changes.
Everyday Care
Cleaning is optional and is mainly for fingerprints, marks or appearance. Use a soft cloth when needed. Routine cleaning is not required for the magnetic system to work normally.
Glossy, transparent and mirror finishes may show fingerprints or cosmetic marks more easily, but this does not normally affect attachment.
Using Wireless Charging and MagSafe-Compatible Accessories
Selected ImagiSnap configurations are designed for MagSafe-compatible charging and magnetic accessories. Remove detachable wallets or cards before charging and position the charger correctly. Charging speed depends on the phone, charger, cable and power adapter.
Read the wireless charging guide for troubleshooting.
When to Replace a Component
The system should continue to work normally as long as the magnetic ring remains intact and the Base Case and Snap-On Cover have no physical damage. Replace a component when the magnetic ring is detached or damaged, or when the part is cracked, severely bent, deformed or no longer aligns correctly.
Frequently Asked Questions
Does the Snap-On Cover need to click into place?
No special force is required. Align the cover and let the magnetic ring draw it into position.
Can I change the cover while the phone remains in the Base Case?
Yes. That is the intended everyday use of the ImagiSnap system.
Why does the cover not sit flat?
Confirm that the Base Case and Snap-On Cover match the same exact phone model. Also check whether either component or the magnetic ring has been physically damaged.
Next Step
For first-purchase guidance, read Build Your First ImagiSnap Set. To check device matching, use the ImagiSnap Compatibility Guide.